List of 37 Solutions and 32 Compounds in FTmisc


List of 37 Solutions

1. FTmisc-BCCS
bcc metal phase Co-Cr-Cu-Fe-Mn-Ni-Pb-Zn-S to calculate sulfide/metal equilibria
Do not select simultaneously with any other bcc metal solution from any database

2. FTmisc-CdLQ
Cd-liq Liquid Alloy Cd-Zn-Na-Pb; dilute Tl,Ga,O valid only at high Cd content.
(Do not use simultaneously with any other liquid metal phase)

3. FTmisc-CdZn
Solid_Cd-Zn Cd-Zn solid solution. Large miscibility gap (use I option).

4. FTmisc-Cove
Covellite CuS-(FeS) solid solution with CuS as major component

5. FTmisc-Cu2S
Cu2S-s.s., rich in Cu2S; dilute PbS,ZnS

6. FTmisc-CuLQ
Cu-liq_or_speiss (presence of Cu not essential). <50% As, <15 mol% S, <10 mol% O
Cu-Pb-Fe-Zn-As-Ni-Au-S-O (Do not use simultaneously with any other liquid metal phase)

7. FTmisc-CuMS
CuS-MeS nonstoichiometric solid solution [Cu2,Ni2,Fe,Va]S often denoted as Iss
It is not stable in the Cu-S or Me-S binary systems. Possible mis.gap (I-optiion)

8. FTmisc-Dgnt
Digenite Cu(2-x)S-(FeS-NiS) Digenite/Bornite solid solution
Possible miscibility gap (use I-optiion)

9. FTmisc-FCCS
fcc metal phase Co-Cr-Cu-Fe-Mn-Ni-Pb-Zn-S to calculate sulfide/metal equilibria
Do not select simultaneously with any other fcc metal solution from any database

10. FTmisc-FeCu
fcc_Fe-Cu solid solution up to approximately 20% Cu.

11. FTmisc-FeLQ
Fe-liq steel(I-H Jung model). Don't use with any other liq metal phase. For
Iron/Steelmaking Processes, not solidification. Fe-rich(not for stainless)

12. FTmisc-FeS_
FeS-liq ; dilute Fe, FeO, MgS, MnS, TiS, Na2S. Valid only at high FeS content.
(Do not select simultaneously with MATT or MAT2 or with any liquid metal phase)

13. FTmisc-HCZT
Liq_Hg-Cd-Zn-Te (Do not use with any other liquid metal phase)
Possible small miscibility gap near 30 mol % Te, 70 mol % Zn (use I option).

14. FTmisc-M3S2
Beta-Ni3S2 (high-temperature heazlewoodite), homogeneity range near Me3S2
Non-stoichiometric solid solution [Fe,Ni,Cu,Va]2[S]1, Possible mis.gap (I-option)

15. FTmisc-MAT2
Liq(Matte/Metal) Liquid Sulfide or Metal phase: Fe-Ni-Cr-Co-Cu-S
Use [I] or J option. Do not select simultaneously with FTmisc-MATT, FTmisc-FeS_

16. FTmisc-MATT
Matte Liquid S-Cu-Fe-Ni-Co-Pb-Zn-As Possible miscibility gap (use I option)
(Do not use simultaneously with MAT2 or FeS_)

17. FTmisc-MeS2
MeS2 sol.solution FeS2(pyrite)-NiS2(vaesite)-(CuS2). Possible mis. gap (I option)
Solubility of CoS2, MnS2 in this phase has not been modeled, but could be large

18. FTmisc-Mill
NiS-(CuS) Millerite low-T solid solution dilute in CuS

19. FTmisc-MS-c
MeS_cubic (Mn,Fe,Ca,Mg,Cr)S solid solution with cubic rocksalt structure
Possible miscibility gap if Ca is present (use I option)

20. FTmisc-PbLQ
Pb-liq ;dilute Ag,As,Au,Bi,Cu,Fe,Na,O,S,Sb,Sn,Zn. Comp limit > 80 mol % Pb;
Temp range 300 - 1200 C. Do not use with any other liquid metal phase.

21. FTmisc-PbSb
Pb-solid Pb-Sb fcc solution. Valid only near Pb (Pb; dilute Sb).

22. FTmisc-Pent
Pentlandite solid solution (Fe9S8-Ni9S8-Cu9S8)
The solubility of Co9S8 in this phase has not been modeled, but could be large

23. FTmisc-PITZ
Pitzer parameters for concentrated aqueous solution - 96 solutes.
Limited data - consult manual & worked examples concerning missing data.

24. FTmisc-PYRR
Pyrrhotite Non-stoichiometric high-T solid solution FeS-NiS-CrS-CoS(-CuS-MnS)
Possible miscibility gap (Use I option)

25. FTmisc-SbLQ
Sb-liq Liquid Alloy Sb-Pb; dilute As,O valid only at high Sb content.
(Do not use simultaneously with any other liquid metal phase)

26. FTmisc-SbPb
Sb-solid Sb-Pb rhombohedral solution. Valid only near Sb (Sb; dilute Pb).

27. FTmisc-SeLQ
Se-liq Liquid Alloy Se-As-Se2Cl2-AsCl3-Te; dilute O,Li,Na,K valid only at
high Se content. (Do not use simultaneously with any other liquid metal phase)

28. FTmisc-SeTe
Solid_Se-Te Se-Te solid solution.

29. FTmisc-SnLQ
Sn-liq ; dilute Al,Ca,Ce,Co,Cr,Cu,Fe,H,Mg,Mo,Na,Ni,O,P,S,Se,Si and Ti.
Do not select simultaneously with any other liquid metal phase.

30. FTmisc-SPHA
Sphalerite ZnS; dilute FeS solid solution (low temperature)

31. FTmisc-SpiS
Thiospinel Polydymite Ni3S4-(Cu3S4)
The solubility of Fe,Cr,Co,Zn in this phase has not been modeled, could be large

32. FTmisc-TeCZ
Telluride (Cd,Zn)Te(1+-x) non-stoichiometric solid solution.
Do not use simultaneously with TeHg.

33. FTmisc-TeHg
Telluride solid solution (Hg,Cd,Zn)Te
Do not use simultaneously with TECZ.

34. FTmisc-TeLQ
Te-liq Liquid Alloy Te-Se; dilute Pb,Na,O valid only at high Te content.
(Do not use simultaneously with any other liquid metal phase)

35. FTmisc-Vill
Villamaninite (Cu,Ni,Co,Fe)S2 solid solution
It is not stable in the Me-S binary systems

36. FTmisc-WURT
Wurtzite ZnS; dilute FeS solid solution (high temperature)

37. FTmisc-ZnLQ
Zn-liq Liquid Alloy Zn-Cd-Na; dilute O. Oxygen valid only at high Zn content.
(Do not use simultaneously with any other liquid metal phase)


List of 32 Compounds

Co3S4sCo9S8sCoS2s
Cr2S3sCu11Fe2S13sCu2Ss1,s2
Cu3FeS4sCu3FeS8sCu4Fe5S8s
Cu9Fe8S16sCu9Fe9S16sCuFe2S3s
CuFeS2sCuSsFe10S11s
Fe11S12sFe7S8sFe9S10s
FeCr2S4sFeSsFeS2s
MnSsMnS2sNi3S2s
Ni3S4sNi7S6sNi9S8s
NiSsNiS2sPbSs
Ss1,s2ZnSs1,s2